poly(m-phenylene isophthalamide)
ChemistryНомекс is specified as poly(m-phenylene isophthalamide). Density band ~1.38 g/cm³.
What holds Номекс together is not the nickname. Formula poly(m-phenylene isophthalamide), density ~1.38 g/cm³.
Meters are atlas-relative. Grades are the SKUs buyers write.
Фазы
Microstructure
OrderProcessing sets grain, crystallinity or fibre orientation — the reason two lots of Номекс can test differently.
Interfaces
SurfacesCoatings, oxide films, sizings or paper faces often decide weather and fire behaviour more than the bulk brochure.
Defects
FlawsInclusions, voids, knots, pinholes or residual stress start the failures that mill certificates do not list.
Grades
VariantsНомекс is a family. Grade names below are the ones buyers actually write on RFQs.
Ageing
TimeMoisture, UV, creep, hydrogen or carbonation shift properties in service. Design to the aged state.
Относительные шкалы
Strength60
Strength is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Heat envelope88
Heat envelope is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Fire behaviour94
Fire behaviour is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Insulation48
Insulation is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Workability62
Workability is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Circularity36
Circularity is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Марки
Номекс fibre IIIA
Blended garments.Blended garments.
Номекс paper T410
Electrical.Electrical.
Honeycomb
Aero interiors.Aero interiors.
Needled felt
Hot-gas filtration.Hot-gas filtration.
Knit underwear
Motorsport.Motorsport.
Связи
Primary bonding
Номекс holds together by ionic/covalent networks.
Secondary forces
Hydrogen bonds, van der Waals stacks or grain-boundary cohesion set toughness and moisture uptake.
Composites & fills
Fillers, fibres, plasticisers or aggregates are part of the real product, not impurities.
Environment film
Oxides, chars, sizings or paints are the layer the world actually meets.
Change the grade, the coating or the moisture and you have a different material with the same English name.
Продолжить
Ещё в Огнестойкость
🏠
Гипсокартон
Панели двуводного гипса, покупающие время в огне кальцинацией.
Итого 59 🧯Вспучивающаяся краска
Краски, вспучивающиеся в изолирующий кокс — R для стали без толстых плит.
Итого 58 🌡️Керамическое волокно
Огнеупорные волокна на 1000–1400 °C: футеровка, прокладки; AES смягчает риск вдыхания.
Итого 62