Cu
ChemistryМедь is specified as Cu. Density band 8.96 g/cm³.
What holds Медь together is not the nickname. Formula Cu, density 8.96 g/cm³.
Meters are atlas-relative. Grades are the SKUs buyers write.
Фазы
Microstructure
OrderProcessing sets grain, crystallinity or fibre orientation — the reason two lots of Медь can test differently.
Interfaces
SurfacesCoatings, oxide films, sizings or paper faces often decide weather and fire behaviour more than the bulk brochure.
Defects
FlawsInclusions, voids, knots, pinholes or residual stress start the failures that mill certificates do not list.
Grades
VariantsМедь is a family. Grade names below are the ones buyers actually write on RFQs.
Ageing
TimeMoisture, UV, creep, hydrogen or carbonation shift properties in service. Design to the aged state.
Относительные шкалы
Strength40
Strength is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Heat envelope55
Heat envelope is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Fire behaviour76
Fire behaviour is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Insulation6
Insulation is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Workability88
Workability is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Circularity78
Circularity is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Марки
C110 ETP
Electrolytic tough pitch wire.Electrolytic tough pitch wire.
C122 DHP
Phosphorus-deoxidised plumbing tube.Phosphorus-deoxidised plumbing tube.
C101 OFE
Oxygen-free electronics.Oxygen-free electronics.
C260 brass
Cartridge brass, 70/30.Cartridge brass, 70/30.
C932 bronze
Bearing bronze.Bearing bronze.
Связи
Primary bonding
Медь holds together by metallic bonding.
Secondary forces
Hydrogen bonds, van der Waals stacks or grain-boundary cohesion set toughness and moisture uptake.
Composites & fills
Fillers, fibres, plasticisers or aggregates are part of the real product, not impurities.
Environment film
Oxides, chars, sizings or paints are the layer the world actually meets.
Change the grade, the coating or the moisture and you have a different material with the same English name.
Продолжить
Ещё в Металлы
🔩
Сталь
Железо–углерод зданий, судов и рельсов — бесконечно переплавляется.
Итого 66 🥫Алюминий
Лёгкий конструкционный металл ванн Холла–Эру: обшивки, банки, фасады.
Итого 59 ✈️Титан
Высокая удельная прочность и плёнки, стойкие к хлоридам.
Итого 58 🍴Нержавеющая сталь
Пассивные плёнки хрома для кухонь, химии и фасадов.
Итого 64