🏎️Comment on le fabrique

01 Feedstock

Ore, monomer, fibre, mineral or scrap that can legally become Fibre de carbone.

02 Conversion

Edison carbon filament; Shindo/Watt 1960s PAN

03 Forming

Cast, spin, weave, sinter, foam, laminate or coat — the step that sets anisotropy.

04 Heat / cure

Temper, vulcanise, calcine or dry: skip it and the datasheet is fiction.

05 Finish

Coatings, sizings, facers, galvanizing, anodising, painting.

06 Install

Fasteners, adhesives, DFT, compression, dryness — site quality is a material property.

Primary

Virgin route around Japan / UK / US.

Recycled / secondary

Recycling exists but quality or energy often disappoints.

Specialty

High-spec grades leave the commodity mill.

Site-applied

Coatings, sprays, casts — the factory is sometimes a jobsite.

Fibre de carbone process path

Feedstock to installed product.

1. Feed — in
2. Convert — mill
3. Form — shape
4. Finish — coat
5. Install — out
6. Spec — code
7. Scrap loop — rec

Fibre de carbone heat & fire

Energy in, class out.

1. Heat — in
2. Fibre de carbone — mat
3. λ / char — out
4. Ignition — fire
5. Euroclass — class
6. Assembly — sys

Envelope

Melting/softening sublimes; resin burns; conductivity high along fibre; low through-thickness in composites.

Environment

Moisture, UV, chlorides, alkalis or oxygen — pick the one that actually kills Fibre de carbone.

Code

Fire class fibre A1-ish; CFRP follows the matrix is a starting letter, not a wall rating.