NiTi (~50/50 at.%)
ChemistryNitinol is specified as NiTi (~50/50 at.%). Density band ~6.45 g/cm³.
What holds Nitinol together is not the nickname. Formula NiTi (~50/50 at.%), density ~6.45 g/cm³.
Meters are atlas-relative. Grades are the SKUs buyers write.
Fases
Microstructure
OrderProcessing sets grain, crystallinity or fibre orientation — the reason two lots of Nitinol can test differently.
Interfaces
SurfacesCoatings, oxide films, sizings or paper faces often decide weather and fire behaviour more than the bulk brochure.
Defects
FlawsInclusions, voids, knots, pinholes or residual stress start the failures that mill certificates do not list.
Grades
VariantsNitinol is a family. Grade names below are the ones buyers actually write on RFQs.
Ageing
TimeMoisture, UV, creep, hydrogen or carbonation shift properties in service. Design to the aged state.
Medidores relativos
Strength72
Strength is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Heat envelope50
Heat envelope is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Fire behaviour78
Fire behaviour is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Insulation12
Insulation is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Workability38
Workability is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Circularity36
Circularity is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Grados
Superelastic body-temp
Stents, wires.Stents, wires.
SME actuator
High Af.High Af.
F2063 wrought
Implant mill product.Implant mill product.
Drawn filled tube
DFT composites.DFT composites.
Sputtered thin film
MEMS.MEMS.
Enlaces
Primary bonding
Nitinol holds together by ionic/covalent networks.
Secondary forces
Hydrogen bonds, van der Waals stacks or grain-boundary cohesion set toughness and moisture uptake.
Composites & fills
Fillers, fibres, plasticisers or aggregates are part of the real product, not impurities.
Environment film
Oxides, chars, sizings or paints are the layer the world actually meets.
Change the grade, the coating or the moisture and you have a different material with the same English name.
Seguir explorando
Más en Sólidos avanzados
🏎️
Fibra de carbono
Filamentos de polímero con láminas tipo grafito: aero y bicis; el fuego es la resina.
Global 49 ⬡Grafeno
Una lámina de carbono de un átomo: Nobel, bombo en composites, pocos usos honestos.
Global 50 ☁️Aerogel
Esponja de sílice nanométrica: λ entre los más bajos; frágil sin manta.
Global 60 ☀️Perovskita
Haluros ABX3 que dispararon la eficiencia solar de laboratorio; humedad, plomo, vida.
Global 26