At a glance
Decide PTFE from the 327 melt point, not a flex beam note and the figure 327 in Measured properties. Use Natural rubber in Measured properties only as contrast. A shopping guess that drops 327 does not replace the dossier you can already open.
Atlas Verification Checklist
0 / 4 verifiedCheck each criteria to confirm findings against the atlas verdict.
Open the existing chapter · PTFE / melt point, not a flex beam (327)
Open the Measured properties chapter of PTFE and write 327 beside 327 on the melt point, not a flex beam note before you accept a shopping guess. A figure that leaves that chapter is no longer the basis of the decision you can defend.
Keep the figure attached · PTFE / melt point, not a flex beam (327)
Keep 327 attached to PTFE and to the melt point, not a flex beam note in Measured properties. If a shopping guess moves the figure onto Natural rubber or onto a different year, put it back on the page that already exists.
Stay inside the limit · PTFE / melt point, not a flex beam (327)
This is a heat, fire, or flex decision, not a shopping list, and alloy or code can move the safe choice. The melt point, not a flex beam note is a way to read PTFE around the figure 327. It does not add a method, a rank, a cure, or a promised result beyond that page.
Use the second page as contrast · PTFE / melt point, not a flex beam (327)
Open Natural rubber in Measured properties only to see a different existing page. Do not let that page supply missing facts for the 327 melt point, not a flex beam note on PTFE. Two dossiers side by side are still two dossiers.
This is a heat, fire, or flex decision, not a shopping list, and alloy or code can move the safe choice. Check 327 on PTFE in the Measured properties chapter before you act on a shopping guess.
Does the melt point, not a flex beam note replace the PTFE dossier?
No. The note tells you to read the Measured properties chapter of PTFE first and to keep 327 beside 327. The dossier remains the source.
Can Natural rubber override the figure 327?
No. Natural rubber is only a contrast in Measured properties. It cannot erase 327 on the melt point, not a flex beam note.
What if a newer shopping guess ignores 327?
Keep both dates. A later shopping guess does not delete 327. Return to the Measured properties chapter and write down the clash instead of keeping the louder version.