Aerogel in 2010s: Polymer aerogels — Section 799: Polymer aerogels
Field guide 799 on Aerogel checks parameter 0 first whenever evaluating “Polymer aerogels”. aerogel · beat 6 · EN 13501, ASTM E84, ISO 5660, KS F 2271 — they do not equal each other. Keep Aerogel with “Polymer aerogels” and 0 from 2010s. Clothing FR and steel R-ratings are different professions.
Aerogel (SiO2 network + >90% air) is a family of grades whose density ~0.003–0.15 g/cm³, heat band silica sinters; organic aerogels burn, and fire letter silica A1; polymer aerogels not. Aerogel is sold as grades, not as a single substance. Chemistry SiO2 network + >90% air, density ~0.003–0.15 g/cm³, heat band silica sinters; organic aerogels burn.
This atlas treats Aerogel as a system: mill route, coatings, tests and the cavity it sits in. Conductivity note: silica blankets ~0.015–0.025 W/m·K class. Insulation score 98/100 is relative to 32 entries — metals lose, VIPs and aerogels win. Fire letter in editorial use: silica A1; polymer aerogels not. Do not equate A1 with “safe in a blaze” or E with “illegal”. Assemblies decide.
Origin: Kistler 1931; NASA / Aspen 1990s–, United States. The process chapter follows feedstock → conversion → forming → finish → install. Uses span buildings to defence / safety. Pairings matter: vacuum-insulation. Circularity mark 50/100. Ask which scrap, which certificate, which year. Rather than relying on simplified league tables or slogans, keeping the primary Aerogel section open beside benchmark 0 (“Polymer aerogels”) gives operators and readers a verifiable decision trail.
“Polymer aerogels” for Aerogel in 2010s carries 0. Praise without that figure is not a property. Keep Aerogel with “Polymer aerogels” and 0 from 2010s. 02010s
Figures to keep
- Reference
- 2010s
- Key figure
- 0
- Topic
- Aerogel
- Focus
- Polymer aerogels
Interactive Scenario & Decision Matrix
Select your current objective to inspect the recommended benchmark, threshold, and verification path.
Keep heat resistance {heat}.
Briefing 11 for Aerogel aligns condition “Kistler” with reference value 0 on the ground.
Aerogel: 0 (1931)Keep the thermal line {therm0}.
Reading 12 of Aerogel uses “Lab curiosities” and figure 80 as a checkable baseline.
Aerogel: 80 (1960s)Use {therm0} only if it agrees with score {heat}. If they conflict, do not pick a product from this page.
Atlas note 13 on Aerogel defines the operating range of 0 when “NASA Stardust” applies.
Aerogel: 0 (1990s)Reading 4 of Aerogel uses “Aspen Aerogels” and figure 0 as a checkable baseline.
Dossier 14 for Aerogel links case “Aspen Aerogels” directly to metric 0 (1998).
Aerogel: 0 (1998)United States (US) Institutional & Field Benchmark
US- Primary reference framework
- Metals, textiles, polymers, ceramics, and thermal/fire families with locale standards lenses.
- Verification standard
- Season lens: moisture, freeze-thaw, and fire season change how materials fail outdoors — check climate notes on each page.
- Metric & unit convention
- Aerogel · 0 (1931)
Material pages compare grades, process, and fire/thermal behavior for browsing — not a substitute for building codes or structural engineering.
Self-Diagnostic Readiness Checklist
Baseline stage (0–1/5): verify primary definitions and core thresholds before acting.
5-Step Execution & Verification Playbook
- Read the fire-performance mark — Fire on this hub is {fire}/100 — teaching comparison among atlas materials.
- Read the insulation mark — Insulation is {insul}/100 — heat-flow story, not the same question as flame.
- Sit one published fact beside them — Quick fact on file: {fact0}.
- Sustainability is not a fire skip — A high sustainability mark does not replace fire protection in a real assembly.
- Not a building-code rating — Named tests, thickness and build-up still decide compliance — this page is literacy only.
Myth vs. Evidence Fact-Check
Is the fire-performance score a building-code rating?
No. It is an editorial 0–100 teaching mark among materials in this atlas. A real wall or garment needs a named product test, thickness and assembly. This page is not a lab stamp.
When should I read insulation instead of fire?
Use the insulation pick when the question is heat flow — lining, loft, or a cold-bridge — and the fire pick when the question is how the same material behaves in flame. Both numbers already sit on this hub; they answer different jobs.
Does a high sustainability score mean I can skip fire protection?
No. Sustainability here is a relative atlas mark (growth, reuse, embodied story). Bamboo and timber can still char like wood. Fire protection stays a separate specification.
Why is bamboo missing in some languages?
A language URL is published only when the seven chapters are real prose in that language. Bamboo exists in English, Korean, Japanese, Chinese and Spanish. French, German, Portuguese and Russian stay withheld — earlier machine drafts leaked English, so those URLs are not opened.
Domain Jargon & Terminology Decoder
- 1
- Name the use environment (load, moisture, fire, chemicals).
- 2
- Note which standards market you are in.
- 3
- Pair mechanical claims with fire/thermal notes.
- 4
- Verify with current standards before specifying.
- Aerogel (Cabot particles)
- Analysis 65 for Aerogel anchors “Cabot particles” to indicator 0 so readers can verify the scale.
- Aerogel (EN 13501 blankets)
- Record 66 on Aerogel explains what the threshold 13501 means in practice under “EN 13501 blankets”.
Risk & Failure-Mode Early Warning Radar
- Not a building-code manual, SDS substitute, or structural calculation. Always verify with licensed professionals and current standards.
- Section 72 on Aerogel pairs “Lab curiosities” with benchmark figure 80 (1960s) for a grounded decision.
- Analysis 73 for Aerogel anchors “NASA Stardust” to indicator 0 so readers can verify the scale.
- Record 74 on Aerogel explains what the threshold 0 means in practice under “Aspen Aerogels”.
Aluminium in 1970s: 6000-series extrusions — Section 800: 6000-series extrusionsNext essayAll 1100 essays1100