Ca-Mg-Al silicates / soda-lime glass fibres
Chemistry鉱物繊維 is specified as Ca-Mg-Al silicates / soda-lime glass fibres. Density band 20–150 kg/m³ products.
What holds 鉱物繊維 together is not the nickname. Formula Ca-Mg-Al silicates / soda-lime glass fibres, density 20–150 kg/m³ products.
Meters are atlas-relative. Grades are the SKUs buyers write.
段階
Microstructure
OrderProcessing sets grain, crystallinity or fibre orientation — the reason two lots of 鉱物繊維 can test differently.
Interfaces
SurfacesCoatings, oxide films, sizings or paper faces often decide weather and fire behaviour more than the bulk brochure.
Defects
FlawsInclusions, voids, knots, pinholes or residual stress start the failures that mill certificates do not list.
Grades
Variants鉱物繊維 is a family. Grade names below are the ones buyers actually write on RFQs.
Ageing
TimeMoisture, UV, creep, hydrogen or carbonation shift properties in service. Design to the aged state.
相対メーター
Strength16
Strength is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Heat envelope86
Heat envelope is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Fire behaviour96
Fire behaviour is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Insulation86
Insulation is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Workability70
Workability is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Circularity58
Circularity is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
等級
Glass wool batt
Housing cavities.Housing cavities.
Stone wool board
Façades, fire stops.Façades, fire stops.
High-T industrial
Pipe and oven.Pipe and oven.
Blowing wool
Attics.Attics.
Wired mattress
Marine / HVAC.Marine / HVAC.
結合
Primary bonding
鉱物繊維 holds together by ionic/covalent networks.
Secondary forces
Hydrogen bonds, van der Waals stacks or grain-boundary cohesion set toughness and moisture uptake.
Composites & fills
Fillers, fibres, plasticisers or aggregates are part of the real product, not impurities.
Environment film
Oxides, chars, sizings or paints are the layer the world actually meets.
Change the grade, the coating or the moisture and you have a different material with the same English name.