NiTi (~50/50 at.%)
ChemistryNitinol is specified as NiTi (~50/50 at.%). Density band ~6.45 g/cm³.
What holds Nitinol together is not the nickname. Formula NiTi (~50/50 at.%), density ~6.45 g/cm³.
Meters are atlas-relative. Grades are the SKUs buyers write.
Phasen
Microstructure
OrderProcessing sets grain, crystallinity or fibre orientation — the reason two lots of Nitinol can test differently.
Interfaces
SurfacesCoatings, oxide films, sizings or paper faces often decide weather and fire behaviour more than the bulk brochure.
Defects
FlawsInclusions, voids, knots, pinholes or residual stress start the failures that mill certificates do not list.
Grades
VariantsNitinol is a family. Grade names below are the ones buyers actually write on RFQs.
Ageing
TimeMoisture, UV, creep, hydrogen or carbonation shift properties in service. Design to the aged state.
Relative Meter
Strength72
Strength is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Heat envelope50
Heat envelope is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Fire behaviour78
Fire behaviour is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Insulation12
Insulation is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Workability38
Workability is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Circularity36
Circularity is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Sorten
Superelastic body-temp
Stents, wires.Stents, wires.
SME actuator
High Af.High Af.
F2063 wrought
Implant mill product.Implant mill product.
Drawn filled tube
DFT composites.DFT composites.
Sputtered thin film
MEMS.MEMS.
Bindungen
Primary bonding
Nitinol holds together by ionic/covalent networks.
Secondary forces
Hydrogen bonds, van der Waals stacks or grain-boundary cohesion set toughness and moisture uptake.
Composites & fills
Fillers, fibres, plasticisers or aggregates are part of the real product, not impurities.
Environment film
Oxides, chars, sizings or paints are the layer the world actually meets.
Change the grade, the coating or the moisture and you have a different material with the same English name.
Weiter erkunden
Mehr in Fortgeschrittene Feststoffe
🏎️
Kohlenstofffaser
Polymerstämmige Filamente mit Graphitlagen: Aero, Räder; Brand ist das Harz.
Gesamt 49 ⬡Graphen
Eine Kohlenstofflage: Nobel, Composite-Hype, wenige ehrliche Einsätze.
Gesamt 50 ☁️Aerogel
Nanosilikat-Schwamm: λ unter den niedrigsten Feststoffen; ohne Decke brüchig.
Gesamt 60 ☀️Perowskit
ABX3-Halogenide mit Laborsprung bei Solarzellen — Feuchte, Blei, Lebensdauer.
Gesamt 26