(C2H4)n
ChemistryPolietileno is specified as (C2H4)n. Density band 0.91–0.97 g/cm³.
What holds Polietileno together is not the nickname. Formula (C2H4)n, density 0.91–0.97 g/cm³.
Meters are atlas-relative. Grades are the SKUs buyers write.
Fases
Microstructure
OrderProcessing sets grain, crystallinity or fibre orientation — the reason two lots of Polietileno can test differently.
Interfaces
SurfacesCoatings, oxide films, sizings or paper faces often decide weather and fire behaviour more than the bulk brochure.
Defects
FlawsInclusions, voids, knots, pinholes or residual stress start the failures that mill certificates do not list.
Grades
VariantsPolietileno is a family. Grade names below are the ones buyers actually write on RFQs.
Ageing
TimeMoisture, UV, creep, hydrogen or carbonation shift properties in service. Design to the aged state.
Medidores relativos
Strength34
Strength is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Heat envelope28
Heat envelope is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Fire behaviour16
Fire behaviour is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Insulation44
Insulation is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Workability92
Workability is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Circularity28
Circularity is an editorial 0–100 mark relative to the other 31 materials in this atlas — not a laboratory certificate.
Grados
LDPE
High-pressure, branched film.High-pressure, branched film.
LLDPE
Copolymer toughness.Copolymer toughness.
HDPE
Bottles, pipe, crates.Bottles, pipe, crates.
UHMWPE
Medical and fibre.Medical and fibre.
PEX
Crosslinked pipe.Crosslinked pipe.
Enlaces
Primary bonding
Polietileno holds together by covalent chain chemistry.
Secondary forces
Hydrogen bonds, van der Waals stacks or grain-boundary cohesion set toughness and moisture uptake.
Composites & fills
Fillers, fibres, plasticisers or aggregates are part of the real product, not impurities.
Environment film
Oxides, chars, sizings or paints are the layer the world actually meets.
Change the grade, the coating or the moisture and you have a different material with the same English name.