Intumescent coating in 1960s: Albi
Offcuts, red mud, slag, dust and used blowing agents are the unglamorous mass balance. Keep Intumescent coating with “Albi” and 30 from 1960s. English-language RFQs for Intumescent coating often mix ASTM and EN clauses. Pick one family per project.
This atlas treats Intumescent coating as a system: mill route, coatings, tests and the cavity it sits in. Conductivity note: char foam becomes the insulator. Insulation score 70/100 is relative to 32 entries — metals lose, VIPs and aerogels win. Fire letter in editorial use: coating on A1 steel; system tested. Do not equate A1 with “safe in a blaze” or E with “illegal”. Assemblies decide.
Origin: 1960s–70s commercial IFR; cellulosic vs hydrocarbon curves, US / UK / DE. The process chapter follows feedstock → conversion → forming → finish → install. Uses span buildings to defence / safety. Pairings matter: steel. Circularity mark 42/100. Ask which scrap, which certificate, which year.
Related atlas entries, a short glossary, and three threads that keep Intumescent coating honest. EN 13501-1 reaction-to-fire letter (A1–F), not a wall rating. Thermal conductivity in W/m·K. Lower means better bulk insulation. Declared performance after blowing-agent or moisture drift.
The label keeps Intumescent coating, 1960s, and 30. “Albi” is the condition on the figure. Keep Intumescent coating with “Albi” and 30 from 1960s. 301960s
Figures to keep
- Year of the condition
- 1960s
- Property figure
- 30
- Material
- Intumescent coating
- Use line
- Albi
Mineral wool in 1871: US slag wool · 47-1Next essayAll 1000 essays1000