Skip to content Skip to a section
What the material does

Mineral wool in 1990s: EN 13162

The behaviour of Mineral wool is written as 1990s’s “EN 13162,” fixed by 13162. An advert’s adjective is not a melting point. “Room temperature” alone is not a figure. Circularity mark 58/100 — editorial, route-specific.

Mineral wool (Ca-Mg-Al silicates / soda-lime glass fibres) is a family of grades whose density 20–150 kg/m³ products, heat band softens ~1000 °C class (stone), and fire letter A1. Mineral wool is sold as grades, not as a single substance. Chemistry Ca-Mg-Al silicates / soda-lime glass fibres, density 20–150 kg/m³ products, heat band softens ~1000 °C class (stone).

This atlas treats Mineral wool as a system: mill route, coatings, tests and the cavity it sits in. Conductivity note: λ ~0.032–0.040 W/m·K typical batts. Insulation score 86/100 is relative to 32 entries — metals lose, VIPs and aerogels win. Fire letter in editorial use: A1. Do not equate A1 with “safe in a blaze” or E with “illegal”. Assemblies decide.

Origin: Slag wool 19th c.; glass wool 1930s, US / Germany / Denmark. The process chapter follows feedstock → conversion → forming → finish → install. Uses span buildings to defence / safety. Pairings matter: polyurethane-foam. Circularity mark 58/100. Ask which scrap, which certificate, which year.

“EN 13162” for Mineral wool in 1990s carries 13162. Praise without that figure is not a property.1990s

Figures to keep

Year of the condition
1990s
Property figure
13162
Material
Mineral wool
Use line
EN 13162

Nitinol in 2000s: ASTM F2063Next essayAll 1000 essays1000